Sign in

← All documents

Consumer Confidence Report for 2018

Document Date unknown · 5 page(s)

Read as text View original PDF ↗

This is the Town of Centreville’s Annual Drinking Water Quality Report for 2018 (PWSID #0170001), covering January 1–December 31, 2018. The town’s drinking water comes from two groundwater wells in the Aquia formation (Centreville Well 5 and Northbrook Well 6); a Source Water Assessment from 2003 is available for review at Town Hall. The system had two monitoring and reporting violations in 2018: late reporting of arsenic results (results were received by MDE on July 3, 2018) and late reporting of lead and copper results (received by MDE on November 26, 2018); both issues were returned to compliance after MDE received the results. Lead was not detected in the 2018 samples; copper’s 90th percentile result was 0.13 ppm, below the action level of 1.3 ppm. The report includes standard EPA health and contaminant information, a Spanish-language notice, and contact information (Kip Matthews, Director of Public Works, 410-758-1180) and notes town meetings are the first and third Thursdays at 7:00 pm at the Liberty Building.

AI-generated summary — verify against the source document.
Show the raw extracted text

Exactly as extracted, unformatted — for checking against the original. The readable version is easier to read.

ANNUAL DRINKING WATER QUALITY REPORT FOR 2018
TOWN OF CENTREVILLE
PWSID # 0170001
May 2019
We are pleased to present to you this year's Annual Water Quality Report for the period of January 1 to December 31, 2018. This report is
designed to inform you about the water quality and services we deliver to you every day. Our constant goal is to provide you with a safe and
dependable supply of drinking water and to continually improve the water treatment process and protect our water resources. We are committed to
ensuring the quality of your water. The source drinking water for the Town of Centreville’s is Ground Water located in the Aquia formation from
two wells within the town limits.
The Maryland Department of the Environment’s Water Supply Program completed a Source Water Assessment for the Town of Centreville in
2003. A copy of that assessment can be reviewed at Town Hall.
We would like our valued customers to be informed about their water utility. If you would like to learn more, please attend any of our regularly
scheduled town meetings held on the first and third Thursday of each month at 7:00 pm at the Liberty building, 107 North Liberty Street.
If you have any questions about this report or have questions concerning your water quality, please call Kip Matthews, Director of
Public Works at 410-758-1180.
Este informe cotiene informacion muy importante sobre el aqua que usted bebe. Traduzcalo o hable con alguien que lo entienda bien.
The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water
travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and
can pick up substances resulting from the presence of animals or from human activity.

Public Notice for January 2018 to December 2018
Monitoring and Reporting Violation for the safe Drinking Water Act
Town of Centreville
May 2019
Our system received a reporting violation when we were late reporting our arsenic test results to MDE before April 10, 2018. Once
MDE received the test results July 3, 2018 we were returned to Compliance. We also received a reporting violation for Lead and Copper
when our test results were due to MDE by October 10, 2018. MDE received the test results November 26, 2018 and we were returned to
Compliance.
Please call Kip Matthews, Director of Public Works at 410-758-1180 if you have any questions about this notice.
Contaminants that may be present in source water include:
- Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock
operations, and wildlife.
- Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or
domestic wastewater discharges, oil and gas production, mining, or farming.
- Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.
- Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum
production, and can also come from gas stations, urban storm water runoff, and septic systems.
- Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of
contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be
obtained by calling the EPA’s Safe Drinking Water Hotline at (800) 426-4791.
In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by
public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health.
Some people may be more vulnerable to contaminants in drinking water than the general population.
Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people
with HIV/AIDS or other immune system disorders, some elderly and infants can be particularly at risk from infections. These individuals should
seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by

Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is
primarily from materials and components associated with service lines and home plumbing. We cannot control the variety of materials used in
plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for
30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water
tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking
Water Hotline or at http://www.epa.gov/safewater/lead.
Source Water Information
Source Water Name Type of Water Report Status Location
(NORTHBROOK) WELL 6 QA943510 GW Y NEAR 1 MI N OF CENTREVILLE APPROX. 100 FT
W OF WEXFORD DRIVE
CENTREVILLE WELL 5 QA941390 GW Y T OF CENTREVILLE APPROX. .3 MI E OF RT 213
Lead and Copper
Definitions: Action Level Goal (ALG): The level of a contaminant in drinking water below which there is no known or expected risk to health. ALGs
allow for a margin of safety. Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which
a water system must follow.
Collection Action Level 90th # Sites Unit Violation
Lead and Copper Date MCLG (AL) Percentile Over AL Measurement Y/N Likely Source of Contamination
1.3 ppm Erosion of natural deposits; Leaching from wood
Copper 9/3/2018 1.3 0.13 0 N preservatives; Corrosion of household plumbing systems.
NOTE: Lead is tested for triennial (every 3 years) in accordance with Federal and State Regulations in Centreville’s distribution system, and was not
detected in our most recently collected samples 2018.
Water Quality Test Results
Definitions: The following tables contain scientific terms and measures, some of which may require
explanation.
Avg: Regulatory compliance with some MCLs are based on running annual average of monthly
samples.

Level 1 Assessment: A Level 1 assessment is a study of the water system to identify potential problems and determine
(if possible) why total coliform bacteria have been found in our water system.
Level 2 Assessment: A Level 2 assessment is a very detailed study of the water system to identify potential problems
and determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform
bacteria have been found in our water system on multiple occasions.
Maximum Contaminant Level or MCL: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the
MCLGs as feasible using the best available treatment technology.
Maximum Contaminant Level Goal or MCLG: The level of a contaminant in drinking water below which there is no known or expected risk to
health. MCLGs allow for a margin of safety.
Maximum Residual Disinfectant level or MRDL: The highest level of a disinfectant allowed in drinking water. There is convincing evidence that
addition of a disinfectant is necessary for control of microbial contaminants.
Maximum Residual Disinfectant level goal or MRDLG: The level of a drinking water disinfectant below which there is no known or expected risk
to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial
contaminants.
mrem: milligrams per year (a measure of radiation absorbed by the body)
na: not applicable.
ppb: micrograms per liter or parts per billion - or one ounce in 7,350,000 gallons of water.
ppm: milligrams per liter or parts per million - or one ounce in 7,350 gallons of water.
Treatment Technique or TT: A required process intended to reduce the level of a contaminant in drinking water.
Regulated Contaminants
Highest Range of Unit
Collection Detected levels Measurement Violation
Contaminant Date Level Detected MCLG MCL Y/N Likely Source of Contamination
Disinfection and Disinfection By-Products
Chlorine 0.5 0.4-0.5 MRDLG=4 MRDLG=4 ppm N Water additive used to control microbes.

No goal for
Haloacetic Acids (HAA5)* 08/11/2016 1 0-1 the total 60 ppb N By-product of drinking water disinfection
Total Trihalomethanes 0.6-2 No goal for
(TTHM) 08/11/2016 2 the total 80 ppb N By-product of drinking water disinfection
Highest Range of Unit
Collection Detected levels Measurement Violation
Contaminant Date Level Detected MCLG MCL Y/N Likely Source of Contamination
Inorganic Contaminants
1 0-0 0 10 ppb N Erosion of natural deposits; Runoff from orchards; Runoff
Arsenic from glass and electronics production wastes.
0.11-
Discharge of drilling wastes; Discharge from metal
Barium 11/16/2017 0.13 0.13 2 2 ppm N refineries; Erosion of natural deposits.
Highest Range of Unit
Collection Detected levels Measurement Violation
Contaminant Date Level Detected MCLG MCL Y/N Likely Source of Contamination
Radioactive Contaminants
10.4-
Beta/photon emitters 10.4 10.4 0 50 pCi/L N
Decay of natural and man-made deposits.
Thank you for allowing us to continue providing clean, quality water this year. In order to maintain a safe and dependable water
supply we sometimes need to make improvements that will benefit all of our customers.
Please call Kip Matthews, Director of Public Works at 410-758-1180 if you have questions about this report.
An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.