Sign Regulations.pdf

Document Date unknown · 2 page(s)

This is a sign regulation table for commercial and light industrial zoning (C-2, C-3, PBD, I) listing permitted sign types and dimensional rules. It specifies allowed sign types (awning, free‑standing, shopping center, projecting, wall/flat, window, placard/easel, directory, and directional/other), per‑type limits on number, area, and mounting/clearance, and special provisions. Key numeric limits shown include: free‑standing shopping center signs (C-3 & PBD only) up to 130 sq ft and 15 ft high; projecting signs up to 10 sq ft and 15 ft above grade with minimum 8 ft clearance; awning signage limited to a percentage of awning area (max 24 sq ft noted) and minimum 8 ft clearance; window signage limited to 25% of first‑floor glazing and 10% above first floor; placard/easel signs one per business up to 6 sq ft and removable daily; one exterior directory per building entrance at 2 sq ft per tenant (max 10 sq ft and 3 ft); directional signs excluded from commercial area calculations and must not contain commercial messaging. The table also sets a maximum total signage per property of 1 sq ft per linear foot of building‑street frontage, notes that window/directory/placard signs do not count toward that maximum, allows feather/flutter signs one per business if removed daily, and states that comprehensive shopping center plans will determine total signage in C‑3 and PBD districts.

sign regulations C-2 C-3 PBD light industrial awning signage free‑standing signs maximum signage per property

AI-generated summary — verify against the source document.

Show the raw extracted text

Exactly as extracted, unformatted — for checking against the original. The readable version is easier to read.

TABLE 3 -- GENERAL COMMERCIAL C-2, INTENSE COMMERCIAL C-3, PLANNED BUSINESS DISTRICT (PBD), AND LIGHT INDUSTRIAL (I) EXHIBIT C
SIGN TYPES AND DIMENSIONAL REGULATIONS BY ZONING DISTRICT
Zoning District SignTypes Number of Signage Area Maximum Maximum Illumination Other Provisions Refer
Permitted Signs Allowed Determination Signage Area for Height Permitted to Table Notes
each sign type
limited by max
signage area (only max 25% area of internal or Not less than 7 feet
Awning signage part of awning vertically Must be
external
awning) mounted minimum 8ft
clearance from grade.
limited by max max 24 sq ft internal or See Table 4 for EMCs for
1 per lot with front
signage area 6 ft external governmental and
yard, 2 per corner lot
Free Standing institutional uses
(1 ea. Frontage)
Approved as C-3 & PBD Zoning
Free Standing
1 per development part of a internal or Districts Only
Shopping max 130 sq ft 15 ft
Comprehensive external
Center Sign Shopping
General Commercial
Center Signage
(C- 2), Plan
Intense Commercial
(
P
C
la
-
n
3
n
)
e
,
d Business
mi
m
n.
a
h
x
e
h
ig
e
h
ig
t
h
7
t
ft c
i
a
n
a
d
.
n
v
f
'
e
r
t
o
r
N
t
m
is
o
e
t
f r
b
t
o
o
u
n
s
e
t
i
b
x
n
u
t
e
e
i
s
l
n
d
s
d
in
c
m
o
g
n
o
&
d
r
u
e
c
c
a
t
t
h
n
e
a
d
o
n
i
n
n
3
l y
0
Not to exceed building attached (DG can't not
District (PBD), limited by max building height or to exceed 6 in. thick,. Corner lots
Light Industrial (I) Projecting signage area 10 sq ft 15 ft above internal or may have one sign facing each
grade, whichever external street). Must be mounted
minimum 8 ft. clearance from
is lower.
grade.
max 32 sq ft per
limited by max internal or
Wall/Flat sign Can't Not to project more
signage area external
total less than than 18 in.
100 sq ft
cumulatively Includes any sign
cannot exceed viewable through
Window 25% on first floor internal or window even if space
and 10% above external
between window and
first floor
sign.
Placard 1 per business of Must not impede foot
6 sq ft 5 ft traffic and must be
or easel building frontage
type footage removed daily

TABLE 3 -- GENERAL COMMERCIAL C-2, INTENSE COMMERCIAL C-3, PLANNED BUSINESS DISTRICT (PBD), AND LIGHT INDUSTRIAL (I)
SIGN TYPES AND DIMENSIONAL REGULATIONS BY ZONING DISTRICT
1 exterior directory per building internal or
entrance Directory: 2 sq ft per tenant 10 sq ft 3 ft
external
2 sf per sign
Can be wall mounted or
freestanding
Other Not included in internal or Not to contain
Directional signage area external commercial messaging
calculations
1 fluttering or feather
Must be removed daily
sign per business
Maximum total signage per property shall be 1 sq ft/linear ft of buildingstreet frontage
Window signs, directory signs and placard/easel signs shall not count towards maximum sign
lBimulilte.t in boards can be included in free standing, projecting, or wall/flat
Maximum total signage per property will be determined as part of a Comprehensive Shopping Center Signage Plan in C-3 and PBD Zoning